# What do numbers mean on tractor tires?

## What do numbers mean on tractor tires?

The three-number lawn tractor tires numbering system works a bit differently. ... The first number before the “x” indicates the tire's diameter when inflated and not under load. The middle number between the “x” and the “-,” indicates the tire's width. The final number indicates the width of the rim.

## What does 3.50 8 mean on a TYRE?

8" is your, and my, rim size. This tube is for a rim (metal part of a wheel) which has a diameter of 8", thus we are OK so far. In our cases, 3.

## What do the numbers mean on wheelbarrow tires?

A common sizing system for wheelbarrow and hand-cart tires are 2 numbers, separated by a hyphen. ... The first number is the height of the tire sidewall, and the second number is the rim diameter. To get the overall diameter you need to do some math! 6 (rim diameter) + 4.

## How many wheelbarrows makes a trip of sand?

A wheel barrow carries approximately 6 cu ft so there are 60 wheel barrow loads in a 20 ton load of sand.

7.

## How much weight can you carry in a wheelbarrow?

How much weight can a wheelbarrow hold? A normal wheelbarrow can hold up to 1,200 pounds of solid and up to 460 pounds of liquid.

## How much sand do I need for one bag of cement?

So, One bag of cement (50 Kgs) has to be mixed with 115 kgs of Sand, 209 Kgs of aggregate and 27.

4 shovels

## How much is a bag of sand?

Volume of one bag of sand:- typically, weight of one bag of sand is around 50 lb, and 1 cubic feet of sand weighs around 100 lb, so volume of one bag of sand = 50/100 = 0.

1:1.

## Why is river sand better than m sand?

MSand is the only alternative to river sand. Higher concrete strength compared to river sand used for concreting. Though M Sand uses natural coarse aggregates to form, it causes less damage to the environment as compared to river sand. Better quality control since manufactured in a controlled environment.

1:3:5

## What is the best ratio for concrete mix?

The safest bet for any concrete mix is four-two-one: four parts crushed rock; two parts sand; and one part cement. The four-two-one mix, obviously, has seven parts. Conveniently, when mixing concrete, the ratio can be mixed on any range of scales.

## How do you calculate a mix ratio?

Divide 1 by the total number of parts (water + solution). For example, if your mix ratio is 8:1 or 8 parts water to 1 part solution, there are (8 + 1) or 9 parts. The mixing percentage is 11.

6-7 bags

## How long should concrete mix in a mixer?

about 3-5 minutes